Views:

The haptic device drivers for the currently shipping versions of haptic devices to be used with OpenHaptics and Geomagic modeling software are available below for download. Select the appropriate file from the tables below and then follow these steps:

  1. Remove the previously installed Phantom Device Driver or Geomagic Touch Device Driver from Control Panel, if any.

  2. ​Download the .exe or .zip file to your computer.

  3. (for .zip files) Unzip the file.

  4. Run .exe file.

Note:
1. Only one driver can be installed on a computer.

2. All of the listed Windows based Phantom Device Drivers (PDD) support all parallel port & FireWire interface-based PHANTOM devices. Touch Device Drivers (TDD) support Ethernet & USB interface-based Touch devices.

Phantom Device Driver (PDD) installation guide

Geomagic Touch Device Driver (GTDD) installation guide


Product

Version

Driver

Download

Legacy drivers

Geomagic Sculpt

v2019

Touch Device Driver v2018.10.22:

for Ethernet or USB Touch devices (Interface:   )

OS: 7/8/10 (64-bit)

 

 

Freeform & Freeform Plus

v2019

Touch Device Driver v2018.10.22:

for Ethernet or USB Touch devices (Interface:   )

OS: 7/8/10 (64-bit)

 

 
Phantom Device Driver v5.1.9:

for Parallel devices (Interface:  )

OS: 7/8/10 (64-bit)

 

OpenHaptics

v3.4 Touch Device Driver v2018.10.22:

for Ethernet or USB Touch devices (Interface:   )

OS: 7/8/10 (64-bit)

 

 
Geomagic Touch Device Driver v2016.10.13:

for Ethernet Geomagic Touch devices or USB Touch 3D Stylus (Interface:   )

OS: 7/8/10 (64-bit)

 
Phantom Device Driver v5.1.7:

for Firewire or Parallel devices (Interface:   )

OS: XP/Vista/7 (32 bit & 64 bit)

 

Claytools